Pick the colour — we print the rest
FPV and RC parts, things for the home, lamp shades, boxes and workshop jigs. Pick the part, spin it, pick a plastic and a colour that is physically on the shelf. Printed in 1–3 days in Vilnius, shipped anywhere in the EU.
On the shelf right now · Colour: Lava · 7 of 8 loaded · 7.6 kg on the shelf
Parts on file
Everything here is print-ready — click a part to load it into the configurator.
- 5" CanopyFPV5" Canopyfrom €17.90Cam protection that survives the first tree62 × 48 × 40 mm · 22 gConfigure →
- GoPro Mount 30°FPVGoPro Mount 30°from €14.40One piece, no screws into the frame46 × 38 × 34 mm · 14 gConfigure →
- Antenna MountFPVAntenna Mountfrom €10.00Keeps the SMA out of the props34 × 26 × 30 mm · 8 gConfigure →
- Field BoxStorageField Boxfrom €27.50Props, screws and spare cams in one lid180 × 120 × 55 mm · 96 gConfigure →
- Filament Dry BoxStorageFilament Dry Boxfrom €41.90A spool holder that seals230 × 210 × 140 mm · 210 gConfigure →
- Prop Guard SetFPVProp Guard Setfrom €27.40Indoor flying without new walls150 × 150 × 22 mm · 44 gConfigure →
- Self-watering PlanterHomeSelf-watering Planterfrom €20.30Two weeks away, the plant survives130 × 130 × 145 mm · 78 gConfigure →
- Ribbed Lamp ShadeLightingRibbed Lamp Shadefrom €24.90Vase mode, so the light breathes through180 × 180 × 200 mm · 120 gConfigure →
- Towel Hook, pairHomeTowel Hook, pairfrom €11.90Holds a wet towel, not just a dry one60 × 45 × 40 mm · 26 gConfigure →
- Key RackHomeKey Rackfrom €14.90Five keys, one screw180 × 60 × 35 mm · 54 gConfigure →
- Phone & Tablet StandHomePhone & Tablet Standfrom €12.90Two angles, cable passes through110 × 90 × 95 mm · 62 gConfigure →
- Drawer InsertStorageDrawer Insertfrom €19.90Measured to your drawer, not to a standard200 × 150 × 55 mm · 140 gConfigure →
- Shelf Drilling JigWorkshopShelf Drilling Jigfrom €48.10Same holes, every cabinet300 × 60 × 25 mm · 88 gConfigure →
- Angle TemplateWorkshopAngle Templatefrom €14.9015°, 45°, 75° off one edge240 × 201 × 15 mm · 62 gConfigure →
Showing 6 of 14
Build your part
Colour, plastic and layer height change the model and the price live. Nothing is a render — that is the geometry we print.
Colours we have, plastics they come in
No swatch book. This is what is loaded, in grams, and which plastic each colour exists in. Pick one and the whole site changes with it.
- PLA+what lives indoors
- PETGoutdoors and damp rooms
- TPU 95Awhat gets dropped or kicked
- PA-CFwhat carries load or takes a drill bit
Three steps to a parcel
No quotes by email, no waiting a week to hear a price. You see the price while you configure.
- 1Now
You configure it
Pick the part, plastic, colour and layer height. The price updates as you go. Add several parts — they ship in one parcel.
- 2< 24 h
We confirm in a day
We check the spool actually has enough grams left, confirm the lead time and send the total with shipping. Same or next working day.
- 31–3 days
We print and ship
Printing takes 1–3 days. You get a photo of the finished part before it is boxed, then a tracked EU parcel from Vilnius.
Large boxes and PA-CF add a day. We say so before you pay, not after.
Send us your STL
Your own design, a replacement knob, a bracket nobody sells any more. If it fits 256 × 256 × 256 mm we can print it.
What we need from you
- STL or 3MF. 3MF is best — it carries its own units, so no dimension has to be guessed.
- Which plastic, or just tell us what the part has to survive and we will pick.
- Orientation or a "this face must be flat" note, if it matters to you.
- Quantity and the date you need it by.
Bed is 256 × 256 × 256 mm, nozzle 0.4 mm. Bigger parts get split and dowelled — we will show you where the seam lands first.
Where to send it
- Telegram
- @plasticroom
- @plastic.room
- Ships from
- Vilnius, LT · EU-wide
- Reply time
- Same working day